Roof replacement in Addison, TX
Replace worn roofing with a complete plan for the deck, protective layers, flashing and finished roof. Start with a free inspection in Addison.
Give an Addison roof replacement a sound starting point
If shingles keep breaking around new repairs, the problem has moved beyond one opening. A replacement gives us access to the covering and the layers it depends on, so the project can address widespread wear, failed connections and damaged wood together.
We start by looking at the existing roof, including its slopes, roof-to-wall joints, vents and earlier repairs. The new roof needs a sound deck to hold its fasteners. Removing the old covering exposes that deck; concealed damage can change the amount of wood repair needed before the next layers go down.
A full reroof also gives flashing and ventilation a place in the project. Choosing a shingle color comes after deciding how the whole roof will shed water and how the attic's intake and exhaust work together.
How an Addison roof replacement comes together
The order matters. New shingles cannot compensate for a weak base or a roof joint left open beneath them.
Remove and prepare
We remove the old covering and inspect the exposed deck. Soft, delaminated or otherwise damaged areas need repair before they can support the new roof. Tear-off also reveals the condition of the edges and junctions that will meet the new work.
Build the water protection
Underlayment, edge details and flashings form the water-shedding layers beneath and around the shingles. Roof pitch and the selected system govern their installation. Wall and chimney connections have to be integrated with the adjacent construction.
Finish the roof and site
The covering, ridge caps and ventilation details complete the roof. Material handling, tear-off debris and cleanup are part of planning work around the home, including the driveway, doors and areas below the eaves.
Choose the covering for your replacement roof
Shingle choices change the roof’s appearance and tested performance. A conversion to metal is a different installation decision as well as a different look.
What belongs in Addison replacement pricing
A useful replacement price describes the roof being rebuilt and the work included. The same floor plan can have different roof surface areas, heights and intersections.
- Measured roof and removal
The actual slopes, dormers, hips and valleys determine roof area and material cuts. Pitch and height affect access and labor. The number and condition of existing layers affect removal and disposal; waste from cuts belongs in the material quantity.
- Deck and connected details
Visible deck concerns can be included from the start. Additional deterioration discovered after tear-off needs a clear repair allowance or method of pricing. Flashings, vents and edge work should be identified so they do not disappear behind a price for shingles alone.
- Material and project needs
Covering choice, ventilation changes and difficult access can change the project total. Our roof replacement cost guide gives a North Texas planning example with its inclusions. An inspection and measured scope establish the price for your roof.
Addison roof replacement FAQs
Does roof replacement include the wood deck?
It includes assessing the deck once the covering is removed. Sound decking can remain; damaged sections need repair or replacement. The amount of concealed damage is not always visible beforehand, so the planned wood work and how additional damage is handled belong in the replacement scope.
Can the new roof go over the existing shingles?
Sometimes a roof can qualify for an overlay, but covering old shingles leaves the underlying deck concealed and keeps the existing layers in place. Layer count, deck condition, roof loading, local requirements and the selected product all matter. Where deteriorated layers or failed details need work, removal provides the access to correct them.
What changes the price of a replacement?
Roof area, pitch, height, removal, damaged decking and the chosen roof system all matter. Flashing and ventilation work can be significant even on a smaller roof. Use the roof cost calculator for an illustrative material-and-area budget, then discuss the actual scope at the property.
Does an Addison reroof need a permit?
Yes. The Town states that re-roof shingle replacement requires a permit. The project needs the applicable approval alongside its roofing scope; our Addison permit guide links the official answer and application.
Plan the roof from the deck up.
Tell us about the roof you want to replace. We can look at its condition, the covering options and the work around your home.